spec no: dsad0927 rev no: v.4 date: mar/18/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:1203001724 package dimension s APT1608SEC super bright orange description the super bright orange device is made with dh ingaalp (on gaas substrate) light emitting diode chip. 1.6x0.8mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. features 1.6mmx0.8mm smt led, 0.75mm thickness. low power consumption. w ide view ing angle. ideal for backlight and indicator. various colors and lens types available. package: 2000pcs / reel . rohs compliant.
spec no: dsad0927 rev no: v.4 date: mar/18/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:1203001724 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 APT1608SEC super bright orange (ingaalp) water clear 70 200 120 parameter super bright orange units power dissipation 75 mw forward current 30 ma peak forward current [1] 195 ma reverse voltage 5 v operating / storage temperature - 40c to +85c symbol parameter device typ. max. test conditions units peak peak wavelength super bright orange 610 nm i f =20ma d dominant wavelength super bright orange 601 nm i f =20ma ? 1/2 spectral line half - width super bright orange 29 nm i f =20ma c capacitance super bright orange 30 pf v f =0v;f=1mhz v f forward voltage super bright orange 2.0 2.5 v i f =20ma i r reverse current super bright orange 10 ua v r = 5v
spec no: dsad0927 rev no: v.4 date: mar/18/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:1203001724 super bright orange APT1608SEC
spec no: dsad0927 rev no: v.4 date: mar/18/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp:1203001724 recommended soldering pattern (units : mm ) APT1608SEC remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. tape specifications (units : mm )
|